Відео

Yes, there is a solution for recovering a deleted virtual machine on an ESXi server. You can use our software called Hetman Partition Recovery to recover files from virtual machine disks, including VMDK files used by ESXi servers. Here’s how you can proceed with the recovery process: Download and install Hetman Partition Recovery on a Windows computer. Connect the storage device where the virtual machine was stored to the Windows computer. Launch the Hetman Partition Recovery software and select the drive where the virtual machine was stored. Run a scan to search for the deleted VMDK file of the virtual machine. After the scan is complete, preview the found VMDK file and recover it to a safe location. Please note that to recover and save the files, you will need to purchase the product. You can download the software from our website and follow the instructions provided. If you encounter any issues during the recovery process, feel free to contact our tech support for assistance.

The error message you mentioned, “time out command 61h status 84h,” indicates a communication problem between the RAID controller and the drives. This could be due to various reasons such as faulty hardware, incompatible drives, or incorrect RAID configuration. As for the continuous pressing of the F4 key, this is a common requirement in some RAID controller setups to confirm the creation of the RAID array. If the system is not proceeding after pressing F4, it could indicate a potential issue with the RAID controller or the drives. Here are a few steps you can try to troubleshoot the issue: Check the compatibility of the drives with the RAID controller. Make sure they are supported and properly connected. Verify that the RAID controller firmware is up to date. Updating the firmware can sometimes resolve communication issues. Double-check the RAID configuration settings to ensure they are correct for creating a RAID 1 array. If possible, try using different drives to see if the issue persists. This can help determine if the problem is related to the drives themselves.

Here are a few steps you can take to troubleshoot the issue: Check Firewall Settings: Double-check the Windows Defender Firewall settings to ensure that the ports are correctly opened for both inbound and outbound traffic. Check Router Settings: If you are behind a router, make sure that the ports are forwarded to your computer’s local IP address in the router settings. Check Antivirus Software: Sometimes antivirus software can also block ports. Make sure that your antivirus software is not blocking ports 80 and 443. Check Port Status: You can use online tools to check the status of ports 80 and 443 to see if they are open or closed. This can help you determine if the issue is with your configuration or with the network. Restart Services: If you are trying to open ports for a specific application (like a web server), try restarting the application or related services after opening the ports.

DKIM Entry Not Found: Double-check the DKIM configuration in your Postfix settings. Make sure the DKIM key is generated and added correctly to your DNS records in CloudFlare. Verify that the DKIM selector in your DNS records matches the one specified in your Postfix configuration. Ensure that the DNS records have propagated correctly. Sometimes it may take some time for changes to reflect. POP3 Service Not Working: Check if the POP3 service is enabled and running on your Postfix server. You can use tools like telnet to test the POP3 connection. Verify that the necessary ports (usually port 110 for POP3) are open in your firewall settings. Check the Postfix logs for any errors related to the POP3 service. This can help identify the root cause of the issue. CloudFlare Configuration: Ensure that your domain’s DNS settings in CloudFlare are correctly configured to point to your Ubuntu VM’s IP address. Check if there are any CloudFlare firewall rules or settings that might be blocking POP3 traffic. Being a virtual machine should not inherently cause these issues. VirtualBox is a popular virtualization platform, and many users successfully run email servers on VMs without issues. However, ensure that your VM has proper network connectivity and that there are no network-related issues causing the problems.

Do you have an hdd or ssd drive?

We were happy to help)

In your case, you need Hetman Raid Recovery.

The error you encountered, specifically the "exit code 5," indicates that there was an access denied error when trying to register the ExSMIME.dll file using regsvr32.exe. This can occur due to insufficient permissions or the process not being able to access the required files or directories.

If you are encountering an error when trying to restart the opendkim service on your system, you can follow these steps to troubleshoot and resolve the issue: Check the Status of the opendkim Service: Run the following command to view detailed information about the opendkim service status: systemctl status opendkim.service This command will provide you with more specific details about why the service failed to start. Review the Service Logs: To further investigate the issue, you can check the logs related to the opendkim service by running: journalctl -xeu opendkim.service This command will display the logs that can help identify the root cause of the problem. Verify Configuration Files: Ensure that the configuration files for opendkim are correctly set up. Check for any syntax errors or misconfigurations that may be causing the service to fail. Restart the Service: After reviewing the logs and configuration files, you can attempt to restart the opendkim service again using: sudo systemctl restart opendkim Resolve Errors: Based on the information provided in the logs and status output, you may need to address specific errors or issues that are preventing the opendkim service from starting successfully. This could involve correcting configuration settings, permissions, or dependencies.

​@@HetmanRecovery issue solved. Thanks. To solve I removed everything related to opendkim, reinstalled and reconfigured. The issue now is that it's still going to spam folder. I followed all the steps you gave. Any suggestion? By the way, do you recommend any email client to use?

@@juliom.rafael2997 If you have followed all the steps to configure OpenDKIM correctly and emails are still landing in the spam folder, there are a few additional things you can try: Check DNS Records: Ensure that your DNS records are correctly set up, including the DKIM, SPF, and DMARC records. Incorrect or missing DNS records can sometimes cause emails to be marked as spam. Check Email Content: Make sure that the content of your emails is not triggering spam filters. Avoid using spammy language, excessive use of links, or attachments that may be flagged as suspicious. Check IP Reputation: Check if your server’s IP address is not blacklisted. You can use online tools like MXToolbox or Spamhaus to check the reputation of your IP address. Regarding email clients, there are several popular options available depending on your preferences and needs: Microsoft Outlook: A widely used email client with a range of features for both personal and business use. Mozilla Thunderbird: A free and open-source email client with a user-friendly interface and customizable features. Mailbird: A modern email client that integrates with various productivity apps and services. eM Client: A feature-rich email client with support for multiple email accounts and calendar integration. Mailspring: A clean and customizable email client with advanced features like email tracking and scheduling. Ultimately, the best email client for you will depend on your specific requirements such as ease of use, integration with other tools, and compatibility with your email service provider. You can try out a few different clients to see which one suits your needs the best.

You can scan your files with the free version of Hetman Partition Recovery software. It will show you the files it can find for recovery. In the preview window you will see if your files are corrupted or not. In case everything is fine, you will be able to register and recover your files

We are glad to be useful to you)

Here are some general steps you can follow to set up a print server on your router: Connect your printer to the USB port on your Titanium-2122A router. Access the router’s web-based interface by entering the router’s IP address in a web browser. You can usually find the IP address in the router’s manual or by checking your network settings. Log in to the router’s interface using the administrator credentials. Look for the section related to USB devices or print server settings in the router’s interface. Locate the option to set up a print server and follow the on-screen instructions to configure it. Once the print server is set up, you should be able to add the printer on your devices by searching for network printers.

It seems like you might be referring to Samsung Smart Hub, which is a platform that allows you to access various apps and services on Samsung smart TVs. If you are using a VPN to access content from a specific country, here are some considerations: Smart Hub Country Selection: The country you choose in Smart Hub settings can affect the available apps and content based on regional restrictions. If you want to access content specific to Georgia, you may want to select Georgia in the Smart Hub settings. VPN Country: If you are using a VPN to access content from the Netherlands, you can set your VPN to the Netherlands for that purpose. The VPN will route your internet connection through servers in the Netherlands, allowing you to access content as if you were located there. Using VPN with Smart Hub: In most cases, you would only need to use the VPN when setting up or accessing content that is geo-restricted. Once you have set up the Smart Hub and accessed the content you need, you may not need to keep the VPN active unless you want to continue accessing content from a specific country. It’s important to note that the specific requirements and restrictions may vary based on the apps and services you are trying to access through Smart Hub. Make sure to review the terms of use and any regional restrictions for the content you are trying to access. If you have any specific questions or encounter issues related to Samsung Smart Hub or VPN usage, feel free to provide more details so I can assist you further.

Thank you) Geroyam Slava!

If you are encountering an I/O device error while trying to clean your external hard drive using Command Prompt, it indicates that there may be an issue with the input/output operations on the device. Here are some steps you can take to try and fix this issue: Check the Connections: Ensure that the external hard drive is properly connected to your computer and that the cables are not damaged. Try using a different USB port or cable to rule out any connection issues. Run CHKDSK: You can try running the CHKDSK (Check Disk) utility to scan and fix errors on the external hard drive. Open Command Prompt as an administrator and type the command chkdsk /f X: (replace X with the drive letter of your external hard drive) and press Enter. This will attempt to fix any file system errors on the drive. Update Device Drivers: Make sure that the device drivers for your external hard drive are up to date. You can do this through Device Manager in Windows. Use a Different Computer: If possible, try connecting the external hard drive to a different computer to see if the issue persists. This can help determine if the problem is with the drive or the computer. Check for Physical Damage: Inspect the external hard drive for any physical damage such as dents, scratches, or signs of water damage. Physical damage can sometimes cause I/O errors. Data Recovery Software: If you are unable to resolve the I/O device error and you have important data on the external hard drive, consider using data recovery software like Hetman Partition Recovery to recover your files before attempting any further troubleshooting. If none of these steps resolve the I/O device error, it is possible that the external hard drive may be failing and you may need to consider replacing it.

I don't quite understand you, please clarify the question.

A red sector means a programmatically bad sector, and a blue sector means a physically bad sector. A software bad sector (red) is a sector on the disk that is marked as bad by the software. This can be done due to errors in the file system or if the operating system determines that the sector may be untrusted. However, physically this sector may be fine. A physically bad sector (blue) is a sector that has physical damage on the surface of the disk. These damages can be the result of wear and tear, mechanical damage, or other physical causes. Physically damaged sectors cannot be used for data storage.

@@HetmanRecovery thanks a lot for the answer, so can the restore mode have a chance to fix the red sector?

@@HetmanRecovery i got one more question. when im testing my drive i got 3 blue sector with letter "T" inside of it, and its not counted as a Err in the sector indicator because the blue sector in the indicator have letter "X" in the inside of it. so what the blue sector with letter "T" means?

The blue sector with the letter “T” inside of it in the drive testing indicator typically indicates that the sector is marked as “Tentative” or “Tricky” by the testing software. This means that the sector may have some potential issues or errors that need further investigation. It is not considered a definite error like the sectors marked with the letter “X,” but it suggests that there may be some data integrity concerns in that particular sector. In general, when you encounter sectors marked as “T” during a drive test, it is recommended to pay attention to them and monitor their status over time. It is a good idea to back up your important data and consider running diagnostic tools or seeking professional help to assess the health of your drive and address any potential issues before they escalate into more serious problems.

You can scan your files with the free version of Hetman Partition Recovery software. It will show you the files it can find for recovery. In the preview window you will see if your files are corrupted or not. In case everything is fine, you will be able to register and recover your files

What exactly is your error?

We are glad that our video was useful for you)

U paid for it ?

We are glad that our video was useful for you)

You can scan your files with the free version of Hetman Partition Recovery software. It will show you the files it can find for recovery. In the preview window you will see if your files are corrupted or not. In case everything is fine, you will be able to register and recover your files

@@HetmanRecovery TQ sir

I understand that you are looking to recover a WhatsApp backup file that was accidentally deleted. To recover deleted files, including WhatsApp backups, you can try using data recovery software like Hetman Partition Recovery. Here are the general steps you can follow to attempt the recovery: Stop using the drive where the backup was stored to prevent overwriting the deleted data. Download and install Hetman Partition Recovery on your computer. Launch the software and scan the drive where the backup was located. After the scan is complete, look for the WhatsApp backup file in the list of recoverable files. Select the file and proceed with the recovery process. Please note that the success of data recovery depends on various factors, including the extent of data overwriting that may have occurred after the deletion. It’s important to act quickly and avoid using the drive to increase the chances of successful recovery. You can download Hetman Partition Recovery from the official website (hetmanrecovery.com/download.htm) and follow the instructions provided to attempt the recovery. If you encounter any issues during the process, feel free to reach out to our tech support for assistance.

To create a torrent file of something you are already sharing, you can follow these general steps: Download a Torrent Creation Tool: You will need a torrent creation tool to generate the .torrent file. One popular tool for this purpose is “qBittorrent,” which has a built-in feature to create torrent files. Open the Torrent Creation Tool: Launch the torrent creation tool on your computer. Create a New Torrent: Look for an option in the tool to create a new torrent or add a new torrent. Create a New Torrent: Look for an option in the tool to create a new torrent or add a new torrent. Select the File or Folder: Choose the file or folder that you are already sharing and want to create a .torrent file for. Set Tracker Information: Enter the tracker information. Trackers help peers find each other to download and upload data. You can use public trackers or private trackers depending on your sharing preferences. Generate the .torrent File: Once you have selected the file or folder and set the tracker information, proceed to generate the .torrent file. Save the .torrent File: Save the .torrent file to a location on your computer where you can easily access it. Share the .torrent File: Once you have created the .torrent file, you can share it with others who want to download the content you are sharing. You can share the .torrent file through email, messaging apps, or by uploading it to a torrent site.

@@HetmanRecovery thanks, it seems im using an ancient torrent program and i wont be able to sheare and i dont want upgrade.

If your C drive is showing only 31MB available for shrinking, even though there is more storage space on the drive, there are a few possible reasons for this limitation. Here are some steps you can take to potentially resolve this issue: Check for System Files: The available space for shrinking a partition can be limited by unmovable system files located at the end of the partition. You can use the built-in Disk Cleanup tool in Windows to remove unnecessary system files and temporary files that may be blocking the shrinking process. Disable Hibernation and Page File: Windows uses the hibernation file (hiberfil.sys) and the page file (pagefile.sys) which can also limit the amount of space available for shrinking. You can disable hibernation and reduce the size of the page file to free up space. To disable hibernation, open Command Prompt as an administrator and type powercfg /h off. To adjust the size of the page file, right-click on This PC, select Properties, go to Advanced system settings, click on the Settings button under Performance, go to the Advanced tab, and click on Change under Virtual memory. Run Disk Cleanup: Use the Disk Cleanup tool to remove unnecessary files and free up space on the C drive. This can help create more available space for shrinking the partition. Defragment the Drive: Running the built-in Disk Defragmenter tool can help consolidate free space on the drive, making it easier to shrink the partition. You can access the Disk Defragmenter by searching for it in the Start menu. Use Third-Party Partitioning Tools: If the above steps do not resolve the issue, you can consider using third-party partitioning tools like MiniTool Partition Wizard or EaseUS Partition Master to shrink the partition. These tools may offer more flexibility and options for resizing partitions. Before making any changes to your disk partitions, it’s important to back up your important data to prevent any potential data loss. If you are unsure about performing these steps or if you encounter any difficulties, it’s recommended to seek assistance from a professional or contact the support services of the partitioning tool you choose to use.

​@@HetmanRecovery hello is the second step safe for shrinking c drivewithout data loss.i have no backup stored for any drives present.also it is asking for windows pe reboot??